Source: https://timeclock44.com/tools/federal-employee-overtime-calculator/

TimeClock44 is a free hours tracker app for iOS and Android: track work hours, calculate overtime and see take-home pay after taxes in all 50 states and DC.

Get the TimeClock44 app: [App Store](https://apps.apple.com/us/app/hours-tracker-timeclock44/id6755947350?pt=120576754&ct=timeclock44.md&mt=8) · [Google Play](https://play.google.com/store/apps/details?id=com.ehmtech.hours&referrer=utm_source%3Dtimeclock44.md)

# Federal Employee Overtime Calculator (2026 GS Pay)

Pick your GS grade, step, locality pay area and FLSA status, then enter your overtime hours for the pay period. The calculator works out your 2026 hourly rate, your Title 5 or FLSA overtime rate with the GS-10 step 1 ceiling, the biweekly premium pay cap and your overtime pay. Estimates only, not tax or legal advice.

_Interactive tool: open [the web page](https://timeclock44.com/tools/federal-employee-overtime-calculator/) to use it. This Markdown copy has the text only._

A full-time General Schedule employee in the United States on OPM's 2026 tables, with 80 hours of basic pay and no other premium pay this pay period. It doesn't model law enforcement (LEO) tables, special rates other than table 001M, AUO, LEAP, wage-grade (FWS) pay, firefighters, part-time tours, or night, Sunday and holiday premiums. [See everything it leaves out](https://timeclock44.com/tools/federal-employee-overtime-calculator/#not-covered).

Estimates only, not tax or legal advice. Your agency's payroll office applies the official rates.

Enter the multiplier with your hourly rate of basic pay as the job's rate. Here the overtime rate is rounded to the cent before it's multiplied by your hours, and under the GS-10 ceiling the multiplier is rounded to 4 decimals, so for the same overtime hours an app that multiplies before rounding can differ from the pay above by up to 5 cents at 10 hours (60 cents at 120). An app also applies no premium pay cap. Federal comp time is hour for hour (5 CFR 550.114(a), 551.531(a)).

## How federal overtime pay is calculated in 2026

Federal overtime starts from your annual rate of basic pay. For a General Schedule employee, that's the base GS rate for your grade and step, raised by your area's locality percentage and rounded to the nearest whole dollar, "counting 50 cents and over as the next higher dollar" (5 CFR 531.604(b)(4)). A locality rate can't exceed the rate for level IV of the Executive Schedule, which is $197,200 in 2026 (5 CFR 531.606(a)). Divide the annual rate by 2,087 hours and round to the nearest cent, and you have your hourly rate of basic pay (5 U.S.C. 5504(b)). Our guide to [work hours in a year](https://timeclock44.com/blog/how-many-work-hours-in-a-year-2026-calculator/) explains where OPM's 2,087 comes from.

Take a GS-11 step 1 in Washington-Baltimore-Arlington. The 2026 base rate is $63,795, and the 33.94% locality payment brings it to $85,447 a year. Divided by 2,087, that's $40.94 an hour. GS-10 step 1 in the same area pays $77,771, or $37.26 an hour, so the Title 5 overtime ceiling is 1.5 × $37.26 = $55.89. An exempt GS-11 step 1 gets $55.89 an hour for overtime instead of $61.41 (1.5 × $40.94), and 10 hours pay $558.90. Those are the calculator's defaults.

GS-1 to GS-4 need one more check. OPM's special rate table 001M sets a minimum for those grades at every worksite in the United States, and OPM says "a table 001M special rate applies in place of any corresponding locality rate or other applicable special rate that is lower than the table 001M special rate." A GS-2 step 5 in Rest of U.S. has a locality rate of $32,611 but a 001M rate of $39,025, so the calculator uses $39,025. OPM's table leaves GS-4 steps 6 to 10 blank because the Rest of U.S. locality rates are higher there. OPM's published locality hourly tables don't fold 001M in, so for these grades the calculator can show more than those tables.

The 2026 rates come from Executive Order 14368, which raised the base General Schedule by 1.0% and kept all 58 locality percentages at their 2025 levels. They took effect on the first day of the first applicable pay period beginning on or after January 1, 2026.

## Title 5 vs FLSA overtime: the GS-10 step 1 ceiling

Which overtime rule covers you depends on your FLSA status, shown in box 35 of your SF-50: "E" for exempt, "N" for nonexempt. Exempt employees get Title 5 overtime under 5 U.S.C. 5542 and 5 CFR 550.113. Nonexempt employees get FLSA overtime under 5 CFR 551.501. The [FLSA overtime exemption checker](https://timeclock44.com/tools/flsa-overtime-exemption-checker/) covers the private-sector duties tests; federal employees go by box 35.

Under Title 5, an employee whose rate is at or below GS-10 step 1 in their area (locality included) gets 1.5 times their hourly rate. Above that, the overtime rate is the greater of 1.5 times the GS-10 step 1 hourly rate or the employee's own hourly rate (5 CFR 550.113(b)). The ceiling is fixed for each area, so once your own hourly rate passes it, overtime is paid at straight time. In 2026 that happens at GS-12 step 6 in all 58 areas. GS-12 step 5 is the last step the ceiling still lifts: in Washington-Baltimore it pays $55.62 an hour and $55.89 for overtime.

Nonexempt employees aren't held to that ceiling. 5 U.S.C. 5542(c) says Title 5 overtime "shall not apply" to an employee who is subject to the FLSA's overtime provisions, and FLSA overtime is 1.5 times the hourly regular rate, with no GS-10 limit. With basic pay only, the regular rate is the hourly rate of basic pay, so a nonexempt GS-11 step 1 in Washington-Baltimore gets $61.41 an hour. Night pay and other premiums raise the regular rate (the [regular rate of pay calculator](https://timeclock44.com/tools/regular-rate-of-pay-calculator/) shows how that works under the private-sector rules), and this calculator leaves them out.

Overtime work is work "in excess of 8 hours in a day or in excess of 40 hours in an administrative workweek" that is officially ordered or approved, and hours over 8 in a day aren't counted again toward the 40 (5 CFR 550.111(a)). If your basic workweek is the first 40 hours of duty and your pay is above GS-10 step 1, only hours over 40 in the week count (5 CFR 550.111(d)). Agencies credit "every minute of regular overtime work", and a quarter hour is the largest fraction used for irregular or occasional overtime (5 CFR 550.112(a), 551.521). The [payroll time converter](https://timeclock44.com/tools/payroll-time-converter/) turns minutes into the decimal hours this calculator takes.

## The biweekly premium pay cap and comp time

Title 5 overtime has a pay period limit. Basic pay plus premium pay can't exceed the greater of the GS-15 maximum rate in your area or the rate for level V of the Executive Schedule (5 U.S.C. 5547(a)). Each is turned into an hourly rate to the cent and multiplied by 80 hours (5 CFR 550.105(d)). Level V is $184,900 a year, or $7,088.00 a pay period. In the United States the GS-15 step 10 rate is always the higher one, so the cap runs from $7,372.80 in Rest of U.S. to $7,559.20 in areas where GS-15 step 10 reaches $197,200.

Near the top of the scale there's no room left. At GS-15 step 10, and at lower GS-15 steps in the higher-paid areas (from step 6 in Washington-Baltimore, step 5 in New York and step 3 in San Jose-San Francisco, where GS-14 steps 9 and 10 reach it too), basic pay alone reaches the cap, and no Title 5 overtime is payable in a normal pay period. For emergency or mission-critical work, the agency head can apply an annual cap instead (5 CFR 550.106), which this calculator doesn't model. FLSA overtime isn't subject to either cap (5 CFR 551.501(d)).

Comp time is hour for hour: one hour off for each hour of irregular or occasional overtime (5 CFR 550.114(a), 551.531(a)). It has to be used within 26 pay periods after the pay period it was earned in. After that, nonexempt employees must be paid for it. For exempt employees, the agency decides whether it's paid or forfeited, except that it must pay when an exigency of the service beyond the employee's control got in the way (5 CFR 550.114(d), 551.531(d)). An agency can require comp time instead of pay only for irregular or occasional overtime by exempt employees paid above the maximum GS-10 rate (step 10) in their area (5 CFR 550.114(c)). State and local governments follow FLSA section 7(o) instead, with comp time at 1.5 hours per overtime hour, covered by the [comp time calculator](https://timeclock44.com/tools/comp-time-calculator/).

## What this calculator doesn't cover

The calculator works on OPM's 2026 General Schedule tables for a full-time employee in the United States with 80 hours of basic pay and no other premium pay in the pay period. It doesn't model:

- Law enforcement officers on the LEO locality tables (GS-3 to GS-10)
- Special rates other than table 001M
- Administratively uncontrollable overtime (AUO) and law enforcement availability pay (LEAP)
- Federal Wage System (wage-grade) employees, covered by 5 U.S.C. 5544
- Wildland firefighters and 5 U.S.C. 5545b firefighter pay, DOT air traffic controllers and Border Patrol agents
- Title 38 VA pay, and SES, SL and ST positions
- Part-time and intermittent tours
- Night, Sunday and holiday premiums, which raise the FLSA regular rate and use up room under the premium pay cap
- The annual premium pay cap, retained pay, and nonforeign and overseas allowances
- 2027 rates, which OPM hasn't published

OPM publishes the pay tables each year. If you log your shifts in [TimeClock44](https://timeclock44.com/#download), give the job your hourly rate of basic pay, pick the daily 8-hour or weekly 40-hour overtime rule and enter the multiplier above. Each job has one overtime rule, while federal overtime counts both, so pick weekly 40 if your overtime comes as extra days and daily 8 if it comes as long days. The app prices overtime as that rate times the multiplier, with no premium pay cap, so check a capped pay period here.

**Disclaimer:** Estimates only, not tax or legal advice. Figures come from OPM's 2026 General Schedule, locality and special rate tables, Executive Order 14368, title 5 of the U.S. Code and 5 CFR parts 531, 550 and 551. Your agency's HR office decides your FLSA status, and its payroll office applies the official rates.

## Frequently Asked Questions

Common questions about federal employee overtime calculator (2026 gs pay)

### How is overtime calculated for federal employees in 2026?

Divide your 2026 annual rate, locality pay included, by 2,087 hours and round to the cent. That's your hourly rate of basic pay. If you're FLSA-exempt, you get Title 5 overtime: 1.5 times that rate when it's at or below the GS-10 step 1 rate in your area, and above that, the greater of 1.5 times the GS-10 step 1 hourly rate or your own hourly rate (5 CFR 550.113). If you're nonexempt, you get FLSA overtime at 1.5 times your hourly regular rate (5 CFR 551.501). In Washington-Baltimore, GS-10 step 1 pays $77,771 a year, or $37.26 an hour, so the Title 5 ceiling there is $55.89 an hour.

### Why is my federal overtime paid at straight time?

If you're FLSA-exempt and your hourly rate of basic pay is higher than 1.5 times the GS-10 step 1 rate in your area, your Title 5 overtime rate is your own hourly rate (5 U.S.C. 5542(a)(2)). In 2026 that starts at GS-12 step 6 in every locality area. A Washington-area GS-14 step 1 earns $68.96 an hour, and that's also the overtime rate. Nonexempt employees aren't affected: FLSA overtime is 1.5 times the regular rate at every grade.

### Does the GS-10 step 1 cap apply to FLSA nonexempt employees?

No. OPM's Title 5 overtime fact sheet says: "These hourly overtime pay limitations do not apply to prevailing rate (wage) employees or to FLSA overtime pay." Nonexempt employees get 1.5 times their regular rate with no ceiling, and the biweekly premium pay cap doesn't apply to FLSA overtime either (5 CFR 551.501(d)).

### How do I know if I'm FLSA exempt or nonexempt?

Look at box 35 of your SF-50: "E" means exempt, covered by Title 5 overtime, and "N" means nonexempt, covered by FLSA overtime. Your agency's HR office decides it, and under 5 CFR 551.202(e) the decision must "ultimately rest on the duties actually performed by the employee." The [FLSA overtime exemption checker](https://timeclock44.com/tools/flsa-overtime-exemption-checker/) walks through the private-sector duties tests; as a federal employee, go by your SF-50.

### What is the biweekly premium pay cap in 2026?

Your basic pay plus Title 5 premium pay in a pay period can't exceed the greater of the GS-15 step 10 rate in your area or the rate for level V of the Executive Schedule (5 U.S.C. 5547(a)). Each is figured as an hourly rate to the cent times 80 hours (5 CFR 550.105(d)). Level V works out to $88.60 × 80 = $7,088.00, and in the United States the GS-15 step 10 rate is always higher. That puts the cap at $7,372.80 in Rest of U.S. and $7,559.20 in areas where GS-15 step 10 reaches the $197,200 limit. For emergency or mission-critical work, an agency can apply an annual cap instead (5 CFR 550.106).

### How much comp time do I get for an hour of overtime?

One hour. Federal comp time is granted "for an equal amount of irregular or occasional overtime work" (5 CFR 550.114(a), 551.531(a)), not at 1.5 times. You have 26 pay periods after the pay period you earned it in to use it. If you're nonexempt and don't, you must be paid the overtime pay you would have received for those hours (5 CFR 551.531(d), (g)). If you're exempt, your agency decides whether to pay you or have you forfeit it, but it must pay when an exigency of the service beyond your control kept you from using it (5 CFR 550.114(d)). State and local government comp time works differently: see the [comp time calculator](https://timeclock44.com/tools/comp-time-calculator/).

### Can my agency make me take comp time instead of overtime pay?

Only if you're FLSA-exempt and your rate of basic pay, locality included, is above the maximum rate for GS-10 (step 10) in your area, and only for irregular or occasional overtime (5 CFR 550.114(c)). An agency "may not require" comp time for FLSA-nonexempt employees (5 CFR 551.531(c)); for them, comp time is granted only at their request.

### Did GS pay go up in 2026, and will it go up in 2027?

In 2026, Executive Order 14368 raised the base General Schedule by 1.0% and left all 58 locality percentages at their 2025 levels, effective the first day of the first applicable pay period beginning on or after January 1, 2026. For 2027, the President's alternative pay plan of August 26, 2026 says that "base pay and locality pay for civilian Federal employees will not change from the 2026 rates." Congress can still act, and OPM hadn't published 2027 tables when this page was written, so the calculator uses the 2026 rates.

## Related Tools

- [8 and 80 Overtime Calculator](https://timeclock44.com/tools/8-and-80-overtime-calculator/): Enter 14 days of hours to see 8/80 overtime for nurses and hospital staff: hours over 8 a day, hours over 80, and a side-by-side 40-hour comparison.
- [ACA Full-Time Status Checker](https://timeclock44.com/tools/aca-full-time-status-checker/): Check whether an employee counts as full-time under the ACA using the 30-hour-per-week and 130-hour-per-month rule.
- [Commission Calculator](https://timeclock44.com/tools/commission-calculator/): Estimate sales commission earnings for flat-rate, tiered, and base-salary-plus-commission plans, plus your effective commission rate.
- [Comp Time Calculator](https://timeclock44.com/tools/comp-time-calculator/): Calculate compensatory time off earned from overtime under FLSA Section 7(o), with accrual at 1.5x, balance tracking, the 240/480-hour cap, and cash-out value.
