Shift Coverage Staffing Calculator
Find how many employees it takes to cover a 24/7 or extended-hours schedule, with a relief factor for time off and the overtime cost of running short.
Shift Coverage Staffing Calculator
Coverage
Hours a week your operation must be staffed. 24 hours × 7 days = 168.
A week has 168 hours, so this counts as 168.
Enter 0 or more.
People on duty at once. If it changes by shift, run each shift on its own or use the weekly average.
Enter 0 or more.
Schedule and Time Off
A full-time schedule: 40 for 5 × 8 or 4 × 10, 36 for 3 × 12, 42 on average for a 2-2-3 rotation.
A week has 168 hours, so this counts as 168.
Enter 0 or more.
Turns days off into hours: a day off on a 12-hour shift leaves 12 hours to fill, not 8. It only matters when days off is above 0.
A day has 24 hours, so this counts as 24.
Enter 0 or more.
Vacation, sick days, training, holidays you stay open on, and other leave. Use the average actually taken last year.
A year has 365 days, so this counts as 365.
Enter 0 or more.
Staff and Pay
People on this schedule today. Count a part-timer as a fraction (20 hours on a 40-hour schedule is 0.5). The FTE calculator converts a mix of hours.
Enter 0 or more.
Straight-time rate of the people who would work the extra hours.
Enter 0 or more.
—
Rounded up for the whole team, not per position.
If You're Short-Staffed
Assumes the people covering the gap already work their full scheduled hours that week.
No one on staff to work overtime: every hour of the schedule is uncovered.
| Straight-time part (1.0×) | — |
|---|---|
| Overtime premium (0.5×) | — |
| Total overtime pay (1.5×) | — |
Each figure is rounded to the cent on its own, so the two parts can differ from the total by a cent.
—
The straight-time part is what anyone working those hours would earn. The premium is the extra cost of working them past 40. Hiring has its own costs, like paid leave, benefits and payroll taxes, which this calculator doesn't include. The labor cost calculator adds them up.
Federal overtime is counted one workweek at a time, so time off that comes in clumps puts more hours into overtime than these weekly averages show.
A schedule averaging over 40 hours already pays overtime in some workweeks before any gap. This calculator doesn't price that built-in overtime. The rotating shift schedule generator shows which weeks go over 40.
TimeClock44
Hours Tracker
Log Every Extra Shift You Pick Up
Picking up open shifts? Clock in and out in TimeClock44 with a 40-hour weekly overtime rule, and each shift shows the hours paid at the overtime rate.
Free · No sign-up needed
How to calculate staffing for shift coverage
Staffing a schedule comes down to three numbers: the staff-hours you have to cover, the hours each employee is scheduled, and the hours each employee loses to time off.
Staff-hours to cover are the hours a week you're open times the positions filled at once. A single 24/7 post is 168 hours a week, or 8,760 a year. An employee on a 40-hour schedule is scheduled 2,085.71 hours a year (40 × 365 ÷ 7). Take away 25 days off on 8-hour shifts, which is 200 hours, and one employee covers 1,885.71 hours. Then divide: 8,760 ÷ 1,885.71 = 4.65 FTE, so 5 people. With no time off at all it would be 168 ÷ 40 = 4.20.
Round up the team total, not each position. Three positions at 4.65 each add up to 13.94 FTE, which 14 people cover. Rounding each post up to 5 first would mean hiring 15. If your current staff mixes full-time and part-time hours, the FTE calculator turns the roster into the FTE figure for the "on staff now" field.
What a relief factor is, and what goes into it
The D.C. Auditor defines a relief factor as "the ratio of the number of hours a post must be filled to the average number of regular hours worked by staff who fill that post." Its illustration assumes 40-hour weeks and 41 days away a year (11 federal holidays, 10 days of annual leave, 10 sick days, 5 other days of leave and 5 training days) and gets a factor of 5.0. That's a worked example, not a benchmark. The same report adds that every five more workdays away raises the factor by about 0.12, which holds here too: this calculator gives 4.98 for 41 days off and 5.10 for 46.
Maryland's corrections department uses the net annual work hours method: the hours each post must be filled, the hours each officer is assigned, and the hours an officer can actually fill a post after leave, training and breaks. In 2021 that came to 1.5 FTEs for one 8-hour, 5-day post and 6.1 FTEs for a post filled around the clock. Florida's corrections rule does the same with days: the workdays a post needs in a year (261 for 5 days a week, 365 for 7) divided by the workdays each officer is available. That per-shift factor is the 24/7 figure divided by 3 for 8-hour shifts, about 1.55 at this calculator's defaults.
Some tools use "relief factor" for the time-off multiplier instead: scheduled hours divided by available hours, 1.11 at the defaults. Nothing wrong with that: multiply the no-time-off FTE by it and you land on the same headcount.
The name matters less than what goes into days off. Count vacation, sick days, training, holidays you stay open on and other leave, using what people actually took last year. Some vendor pages suggest a flat 20 to 25% buffer instead. That rule of thumb ignores your own leave data, so it can overshoot or fall short. The absenteeism rate calculator and the annual work hours calculator help pin down the real figure.
What running short costs in overtime
Federal overtime is weekly. Hours past 40 in a workweek are paid at not less than one and one-half times the regular rate (29 U.S.C. 207(a)(1)), and averaging hours over two or more weeks isn't permitted (29 CFR 778.104; DOL Fact Sheet #23). The calculator assumes the people covering a gap already work their full schedule, so on a 40-hour schedule every gap hour is overtime. On a shorter schedule, the hours up to 40 are straight time.
At the defaults the team is 0.65 FTE short: 23.34 uncovered hours a week, or 1,217.14 overtime hours a year. At $20 an hour that overtime pays $36,514.29, which splits into $24,342.86 of straight-time wages and a $12,171.43 premium. The straight-time part is what anyone working those hours would earn. The premium is the extra cost of working them past 40.
That premium isn't the saving from hiring. A new hire is paid for their own leave, plus benefits, payroll taxes, recruiting and training, so compare it with a fully loaded hourly cost from the labor cost calculator. The premium also rests on the regular rate, which can run above the base rate once shift differentials and non-discretionary bonuses count. The regular rate of pay calculator works it out, and the overtime calculator prices one worker's week at time and a half.
Some overtime follows other rules: daily overtime in some states (overtime rules by state), 7(k) work periods for fire and police (7(k) overtime calculator) and the hospital 8-and-80 system (8-and-80 overtime calculator). Double time, other multipliers and employer payroll taxes on the overtime pay aren't modeled either. As for how much overtime one person can work, Fact Sheet #23 says: "There is no limit in the Act on the number of hours employees aged 16 and older may work in any workweek."
Keeping track of the extra shifts
When a team runs short, someone works the extra shifts. If that's you, keep your own record of each one: when you clocked in and out, your breaks, and how many hours landed past 40 that week. That's how you check that the overtime on your paycheck matches the hours you put in.
TimeClock44 is a personal hours tracker for that. You clock in and out on your phone, log your breaks, set a 40-hour weekly overtime rule, and export your timesheet as a PDF or CSV.
Disclaimer: Estimates only, for planning. This calculator isn't legal, payroll or staffing-mandate advice. Overtime rules vary by state, industry and union contract.
Frequently Asked Questions
Common questions about shift coverage staffing calculator
How many employees does it take to cover a 24/7 position?
Start with 168 hours a week ÷ 40 scheduled hours = 4.20 FTE, before anyone takes a day off. Time off pushes it up: with 25 days off a year on 8-hour shifts, it's 4.65 FTE, so 5 people. The D.C. Auditor's example, which assumes 41 days away for holidays, leave, sick days and training, works out to about 5 (4.98 in this calculator). Real leave use runs higher in some places. D.C.'s 911 call takers worked 1,543 regular hours on average in FY 2025, a relief factor of 5.68, and Maryland needed 6.1 FTEs to fill one 24/7 correctional post in 2021. A 2-2-3 rotation's four 42-hour crews cover the clock only when nobody is off. The rotating shift schedule generator lays out those crews week by week.
What is a relief factor, and how do you calculate it?
A relief factor is the number of employees it takes to keep one position filled. Divide the hours the position must be filled in a year by the hours one employee actually covers after time off. That's the D.C. Auditor's definition and the net annual work hours method Maryland's corrections department follows. For a 24/7 post it comes out around 5. For one 8-hour shift post, 7 days a week, it's about 1.55 (a third of the 24/7 figure). That per-shift figure is the one Florida's corrections rule works out in days: workdays the post needs a year ÷ workdays each officer is available. Some calculators use "relief factor" for the time-off multiplier alone, scheduled hours ÷ available hours (1.11 at this calculator's defaults). Multiply the FTE you'd need with no time off by it and you get the same answer.
What time off should I count in days off?
Count every day a scheduled employee isn't there to fill the post: vacation, sick days, training days, holidays the operation stays open on, and other leave such as FMLA, workers' comp time or military leave. Use the average actually taken last year, as Florida's corrections rule does, not the amount employees are offered. Leave out holidays you close on and lower the hours to cover instead. Meal breaks that coworkers cover don't count either (Maryland left them out). The shift length field turns the days into hours. To measure absence first, try the absenteeism rate calculator.
How many overtime hours does a staffing gap create?
Take the hours no one is scheduled to cover and spread them over the weeks they fall in. Under the FLSA, hours past 40 in a workweek are paid at least one and a half times the regular rate (29 U.S.C. 207; DOL Fact Sheet #23). If your people are scheduled under 40, the first hours they pick up are straight time and only the rest is overtime. Each workweek stands alone (29 CFR 778.104), so vacations that come in clumps push more hours into overtime than an average week shows. State daily overtime, public-safety 7(k) work periods and the hospital 8-and-80 system follow different rules: see overtime rules by state, the 7(k) overtime calculator and the 8-and-80 overtime calculator.
What does an open position cost in overtime?
The extra cost is the overtime premium: half the hourly rate on every hour the missing employee would have covered. At $20 an hour and 1,885.71 hours a year (a 40-hour schedule minus 25 days off on 8-hour shifts), that's $18,857.14 a year. Covering those hours at time and a half costs $56,571.43 in all, but $37,714.29 of that is the straight-time wage anyone working the hours would earn. Counting it as overtime cost double-counts wages you'd pay either way. If your staff are scheduled under 40 hours, part of the gap can be picked up at straight time, so the premium is an upper bound.
Is it cheaper to pay overtime than to hire?
It depends on what a hire costs beyond wages. Overtime adds the 0.5 premium on each hour past 40. A new employee is paid for their own leave days too, and brings benefits, payroll taxes, recruiting and training costs. Long overtime stretches also carry fatigue and turnover costs this calculator doesn't price. Compare the premium here with a fully loaded hourly cost from the labor cost calculator.
Why does a 24/7 position need 8,760 hours but each employee only 2,085.71?
Both sides count a 365-day year (52.14 weeks), as Maryland's method does: 24 × 365 = 8,760 hours to cover, and 40 × 365 ÷ 7 = 2,085.71 hours scheduled. The D.C. Auditor's quick example pairs 8,760 with a 2,080-hour year (52 × 40), which counts one day fewer on the employee side. That gives a relief factor of 5.0 for 41 days off, against 4.98 here. Either way you round up to 5 people.
Do 12-hour shifts change how many people I need?
Not on their own: 168 hours is 168 hours. Shift length changes two things. A day off removes 12 hours instead of 8, so 25 days off takes 4.91 FTE on 12-hour shifts against 4.65 on 8-hour shifts. And 12-hour rotations usually average 36 or 42 hours a week instead of 40. Enter the schedule's average weekly hours, and use the rotating shift schedule generator to see which weeks go over 40. For fixed 3 × 12 or 4 × 10 weeks, the compressed work week calculator shows the hours.